# RoadToSea/uart_shell_mcp

> A local Python MCP server for UART and serial-port debugging: capture sessions with a ring buffer and daily logs, regex/event waiting, HEX parsing against YAML protocol descriptions, and automation of shell-like serial consoles.

- Magnitude: 0.0 out of 10 — Quiet
- Stars: 0 total · Not enough measurements today
- Star trust: star growth looks organic
- Category: Hardware, IoT & robotics · Language: Python · License: MIT · Created: 2026-09-23 · Last push: 2026-09-23
- GitHub: https://github.com/RoadToSea/uart_shell_mcp · Page: https://gitnova.dev/en/r/RoadToSea/uart_shell_mcp

## Useful for

- Connect an MCP client to a board and read new log lines via serial_read
- Wait for a specific device message using serial_wait_for
- Parse a device HEX response against a YAML protocol definition without opening a port

## Why it’s here

- There are not enough fresh counter measurements for today's UTC day. The gain is unknown.
- New listing on glama.

## Star trust

Star growth looks organic.

Star-trust labels are heuristics based on the repository’s behavior, not a check of every stargazer.

## Numbers

- Forks: 0
- Issues and pull requests: 0
- Watchers: 0
- Average over the last week: 0 per day
- Usual pace: 0 per day

## Stars per day, last 27 days (oldest → newest, today is partial)

2026-09-23 … 2026-10-19: 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, None, None, None, None, None

## Magnitude by day, last 6 days

10-14 0.0, 10-15 0.0, 10-16 0.0, 10-17 0.0, 10-18 0.0, 10-19 0.0

## Spotted in now

- New listing on glama

## More in this category

1. **dipa-studio/ios-sweet** — 7.2 · Early signal · Hardware, IoT & robotics · Python · +240 stars measured 2026-10-19, 02:52–12:58 UTC, ≈ 388 by evening
   A port of Apple's open-source XNU kernel (xnu-8796, iOS 16 generation) to the Redmi Note 10 Pro (sweet, SM7150), running the unmodified iOS 16.7.16 userland from an iPhone X. Experimental bring-up: the phone boots to the iOS home screen,…
   Full card: https://gitnova.dev/en/r/dipa-studio/ios-sweet.md
2. **0x23/MicroManipulatorStepper** — 6.7 · Breakout · Hardware, IoT & robotics · C++ · +56 stars measured 2026-10-19, 00:05–12:58 UTC, ≈ 123 by evening
   An open-source low-cost motorized XYZ micro-manipulator with sub-micron precision for optical alignment, probing electronics, and microscopy. Controlled via G-code over USB serial, with a Python API and GUI.
   Full card: https://gitnova.dev/en/r/0x23/MicroManipulatorStepper.md
3. **mikroverk/esp32sim** — 6.3 · Early signal · Hardware, IoT & robotics · Rust · +59 stars measured 2026-10-19, 00:05–13:13 UTC, ≈ 119 by evening
   An ESP32 emulator in Rust with instruction-level emulation of Xtensa (ESP32, S3) and RISC-V (C3, C6): boots the real ROM, bootloader and unmodified firmware locally or in the browser via WebAssembly.
   Full card: https://gitnova.dev/en/r/mikroverk/esp32sim.md
4. **VikOlliver/RepRapMicron** — 6.3 · Early signal · Hardware, IoT & robotics · OpenSCAD · +34 stars measured 2026-10-19, 00:06–13:13 UTC, ≈ 73 by evening
   The μRepRap project extends the open-source RepRap 3D printer to micron-scale fabrication. It uses GCODE, GRBL, NEMA17 steppers, and materials like UV nail gel and standard resin.
   Full card: https://gitnova.dev/en/r/VikOlliver/RepRapMicron.md
5. **raullenchai/esp32-thinks** — 4.5 · Early signal · Hardware, IoT & robotics · Shell · +1 star measured 2026-10-19, 00:06–12:59 UTC, ≈ 26 by evening
   Firmware for the Seeed SenseCAP Watcher (ESP32-S3) that turns the device into a voice assistant with on-chip wake word and OpenAI-compatible STT, chat and TTS endpoints configured per task.
   Full card: https://gitnova.dev/en/r/raullenchai/esp32-thinks.md

---

Magnitude (0–10) measures how fast and how unusually interest in a repository is growing right now. It is not a quality score.
Days are UTC. “So far today” is a fact; “expected by the end of the day” is a forecast.
Summaries and use cases are written by an LLM (DeepSeek V4.1 Flash) from the README and may be inaccurate: verify specific claims (benchmarks, speed, hardware) in the repository itself.
Data as of 2026-10-19 13:14 UTC, updated every 30 minutes.